☆ころりんEJ20た～ぼ☆

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-9-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Nov 20 21:57:00 UTC 2008 (Ubuntu 2.6.27-9.19-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1fff0000 @ 7000-d000
[ 0.000000] RAMDISK: 1f80e000 - 1ffdf8d3
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FA3B0, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 NEC DModel2A 10 MSFT 97)
[ 0.000000] ACPI: FACP 1FFF0030, 0081 (r1 NEC DModel2A 11 MSFT 97)
[ 0.000000] ACPI: DSDT 1FFF01C0, 3308 (r1 NEC D2A2G000 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFF00C0, 0054 (r1 NEC DModel2A 9 MSFT 97)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 00000000 - 1fff0000
[ 0.000000] bootmap 00002000 - 00006000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [001f80e000 - 001ffdf8d3] RAMDISK ==> [001f80e000 - 001ffdf8d3]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
[ 0.000000] found SMP MP-table at [c00fba30] 000fba30
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130959
[ 0.000000] free_area_init_node: node 0, pgdat c048a580, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 125844 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129807
[ 0.000000] Kernel command line: root=UUID=bef02b2a-c48e-444c-a0d8-2c079dd1dadf ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 2004.531 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 505668k/524224k available (2572k kernel code, 17984k reserved, 1160k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xff3fe000 ( 491 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038335a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038335a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 4009.06 BogoMIPS (lpj=8018124)
[ 0.004043] Security Framework initialized
[ 0.004055] SELinux: Disabled at boot.
[ 0.004085] AppArmor: AppArmor initialized
[ 0.004101] Mount-cache hash table entries: 512
[ 0.004366] Initializing cgroup subsys ns
[ 0.004374] Initializing cgroup subsys cpuacct
[ 0.004379] Initializing cgroup subsys memory
[ 0.004403] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004409] CPU: L2 cache: 512K
[ 0.004412] CPU: Hyper-Threading is disabled
[ 0.004434] Checking 'hlt' instruction... OK.
[ 0.020676] SMP alternatives: switching to UP code
[ 0.031772] Freeing SMP alternatives: 11k freed
[ 0.031779] ACPI: Core revision 20080609
[ 0.033920] ACPI: Checking initramfs for custom DSDT
[ 0.501669] ENABLING IO-APIC IRQs
[ 0.501866] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.541560] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 07
[ 0.544031] Brought up 1 CPUs
[ 0.544031] Total of 1 processors activated (4009.06 BogoMIPS).
[ 0.544031] CPU0 attaching sched-domain:
[ 0.544031] domain 0: span 0 level CPU
[ 0.544031] groups: 0
[ 0.544031] net_namespace: 840 bytes
[ 0.544031] Booting paravirtualized kernel on bare hardware
[ 0.544031] Time: 13:09:22 Date: 12/15/08
[ 0.544031] NET: Registered protocol family 16
[ 0.544031] EISA bus registered
[ 0.544031] ACPI: bus type pci registered
[ 0.544031] PCI: PCI BIOS revision 2.10 entry at 0xfdb61, last bus=3
[ 0.544031] PCI: Using configuration type 1 for base access
[ 0.546046] ACPI: EC: Look up EC in DSDT
[ 0.554419] ACPI: Interpreter enabled
[ 0.554426] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.554454] ACPI: Using IOAPIC for interrupt routing
[ 0.563106] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.563245] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff]
[ 0.563416] PCI: 0000:00:1d.0 reg 20 io port: [e800, e81f]
[ 0.563479] PCI: 0000:00:1d.1 reg 20 io port: [ec00, ec1f]
[ 0.563553] PCI: 0000:00:1d.7 reg 10 32bit mmio: [dff7bc00, dff7bfff]
[ 0.563616] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.563624] pci 0000:00:1d.7: PME# disabled
[ 0.563674] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
[ 0.563676] * this clock source is slow. If you are sure your timer does not have
[ 0.563678] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.563728] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.563737] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.563743] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO
[ 0.563768] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.563777] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.563786] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.563795] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.563804] PCI: 0000:00:1f.1 reg 20 io port: [fc00, fc0f]
[ 0.563813] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
[ 0.563873] PCI: 0000:00:1f.3 reg 20 io port: [c00, c1f]
[ 0.563926] PCI: 0000:00:1f.5 reg 10 io port: [e400, e4ff]
[ 0.563935] PCI: 0000:00:1f.5 reg 14 io port: [e000, e03f]
[ 0.563944] PCI: 0000:00:1f.5 reg 18 32bit mmio: [dffffe00, dfffffff]
[ 0.563953] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [dffffd00, dffffdff]
[ 0.563986] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.563993] pci 0000:00:1f.5: PME# disabled
[ 0.564080] PCI: 0000:01:00.0 reg 10 32bit mmio: [de000000, deffffff]
[ 0.564089] PCI: 0000:01:00.0 reg 14 32bit mmio: [c8000000, cfffffff]
[ 0.564097] PCI: 0000:01:00.0 reg 18 32bit mmio: [d5980000, d59fffff]
[ 0.564117] PCI: 0000:01:00.0 reg 30 32bit mmio: [dfde0000, dfdfffff]
[ 0.564177] PCI: bridge 0000:00:01.0 32bit mmio: [ddc00000, dfdfffff]
[ 0.564183] PCI: bridge 0000:00:01.0 32bit mmio pref: [c5700000, d59fffff]
[ 0.564226] PCI: 0000:03:00.0 reg 10 32bit mmio: [d8000000, dbffffff]
[ 0.564323] PCI: 0000:03:02.0 reg 10 32bit mmio: [dfee0000, dfefffff]
[ 0.564338] PCI: 0000:03:02.0 reg 18 io port: [cc00, cc3f]
[ 0.564384] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[ 0.564390] pci 0000:03:02.0: PME# disabled
[ 0.564433] pci 0000:00:1e.0: transparent bridge
[ 0.564439] PCI: bridge 0000:00:1e.0 io port: [c000, cfff]
[ 0.564446] PCI: bridge 0000:00:1e.0 32bit mmio: [dfe00000, dfefffff]
[ 0.564453] PCI: bridge 0000:00:1e.0 32bit mmio pref: [d5a00000, ddafffff]
[ 0.564469] bus 00 -> node 0
[ 0.564482] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.564750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 0.587335] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.587534] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.587732] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.588007] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.588230] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.588428] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.588626] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.588898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.589123] ACPI: Power Resource [URP1] (off)
[ 0.589185] ACPI: Power Resource [URP2] (off)
[ 0.589245] ACPI: Power Resource [FDDP] (off)
[ 0.589306] ACPI: Power Resource [LPTP] (off)
[ 0.589441] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.589510] pnp: PnP ACPI init
[ 0.589525] ACPI: bus type pnp registered
[ 0.594612] pnp: PnP ACPI: found 12 devices
[ 0.594617] ACPI: ACPI bus type pnp unregistered
[ 0.594624] PnPBIOS: Disabled by ACPI PNP
[ 0.595331] PCI: Using ACPI for IRQ routing
[ 0.595515] NET: Registered protocol family 8
[ 0.595515] NET: Registered protocol family 20
[ 0.595515] NetLabel: Initializing
[ 0.595515] NetLabel: domain hash size = 128
[ 0.595515] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.595515] NetLabel: unlabeled traffic allowed by default
[ 0.596185] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.596190] actual entries 65620
[ 0.596450] AppArmor: AppArmor Filesystem Enabled
[ 0.596478] ACPI: RTC can wake from S4
[ 0.596570] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.596575] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.596579] system 00:01: ioport range 0xa00-0xa7f has been reserved
[ 0.596586] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.632182] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.632187] pci 0000:00:01.0: IO window: disabled
[ 0.632195] pci 0000:00:01.0: MEM window: 0xddc00000-0xdfdfffff
[ 0.632202] pci 0000:00:01.0: PREFETCH window: 0x000000c5700000-0x000000d59fffff
[ 0.632212] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.632217] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.632224] pci 0000:00:1e.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.632231] pci 0000:00:1e.0: PREFETCH window: 0x000000d5a00000-0x000000ddafffff
[ 0.632256] pci 0000:00:1e.0: setting latency timer to 64
[ 0.632263] bus: 00 index 0 io port: [0, ffff]
[ 0.632266] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.632269] bus: 01 index 0 mmio: [0, 0]
[ 0.632272] bus: 01 index 1 mmio: [ddc00000, dfdfffff]
[ 0.632276] bus: 01 index 2 mmio: [c5700000, d59fffff]
[ 0.632279] bus: 01 index 3 mmio: [0, 0]
[ 0.632282] bus: 03 index 0 io port: [c000, cfff]
[ 0.632286] bus: 03 index 1 mmio: [dfe00000, dfefffff]
[ 0.632289] bus: 03 index 2 mmio: [d5a00000, ddafffff]
[ 0.632292] bus: 03 index 3 io port: [0, ffff]
[ 0.632295] bus: 03 index 4 mmio: [0, ffffffff]
[ 0.632317] NET: Registered protocol family 2
[ 0.632561] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.632960] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.633085] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.633210] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.633216] TCP reno registered
[ 0.633362] NET: Registered protocol family 1
[ 0.633560] checking if image is initramfs... it is
[ 1.136080] Switched to high resolution mode on CPU 0
[ 1.609228] Freeing initrd memory: 8006k freed
[ 1.610470] audit: initializing netlink socket (disabled)
[ 1.610500] type=2000 audit(1229346563.608:1): initialized
[ 1.617010] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.620990] VFS: Disk quotas dquot_6.5.1
[ 1.621160] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.621347] msgmni has been set to 1003
[ 1.621569] io scheduler noop registered
[ 1.621574] io scheduler anticipatory registered
[ 1.621578] io scheduler deadline registered
[ 1.621604] io scheduler cfq registered (default)
[ 1.621712] pci 0000:01:00.0: Boot video device
[ 1.622327] isapnp: Scanning for PnP cards...
[ 1.976356] isapnp: No Plug & Play device found
[ 2.053421] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.053598] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.055052] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.058351] brd: module loaded
[ 2.058489] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.058719] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.061715] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.061728] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.062577] mice: PS/2 mouse device common for all mice
[ 2.062857] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.062886] rtc0: alarms up to one month, y3k
[ 2.063125] EISA: Probing bus 0 at eisa.0
[ 2.063168] EISA: Detected 0 cards.
[ 2.063174] cpuidle: using governor ladder
[ 2.063177] cpuidle: using governor menu
[ 2.064032] TCP cubic registered
[ 2.064084] Using IPI No-Shortcut mode
[ 2.064551] registered taskstats version 1
[ 2.064709] Magic number: 4:159:180
[ 2.064772] tty ttyr6: hash matches
[ 2.064898] rtc_cmos 00:04: setting system clock to 2008-12-15 13:09:24 UTC (1229346564)
[ 2.064903] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.064906] EDD information not available.
[ 2.065602] Freeing unused kernel memory: 424k freed
[ 2.065680] Write protecting the kernel text: 2576k
[ 2.065726] Write protecting the kernel read-only data: 936k
[ 2.107276] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.336378] fuse init (API version 7.9)
[ 2.520188] processor ACPI0007:00: registered as cooling_device0
[ 2.520196] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.322217] usbcore: registered new interface driver usbfs
[ 3.322259] usbcore: registered new interface driver hub
[ 3.322350] usbcore: registered new device driver usb
[ 3.333790] No dock devices found.
[ 3.342225] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.342246] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.342251] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.342333] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.346243] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.346253] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 3.346272] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff7bc00
[ 3.354124] USB Universal Host Controller Interface driver v3.0
[ 3.382895] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.383182] usb usb1: configuration #1 chosen from 1 choice
[ 3.383240] hub 1-0:1.0: USB hub found
[ 3.383256] hub 1-0:1.0: 4 ports detected
[ 3.463035] SCSI subsystem initialized
[ 3.463188] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 3.463193] Copyright (c) 1999-2006 Intel Corporation.
[ 3.495282] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.495299] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.495305] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.495354] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.495398] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
[ 3.495575] usb usb2: configuration #1 chosen from 1 choice
[ 3.495643] hub 2-0:1.0: USB hub found
[ 3.495665] hub 2-0:1.0: 2 ports detected
[ 3.537755] libata version 3.00 loaded.
[ 3.596546] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.596563] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.596569] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.596624] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.596667] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ec00
[ 3.596861] usb usb3: configuration #1 chosen from 1 choice
[ 3.596914] hub 3-0:1.0: USB hub found
[ 3.596930] hub 3-0:1.0: 2 ports detected
[ 3.701115] e1000 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.701190] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.701246] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 3.701268] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 3.975291] e1000: 0000:03:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:0c:76:08:cf:41
[ 4.010122] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 4.021217] ata_piix 0000:00:1f.1: version 2.12
[ 4.021239] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.021318] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.021890] scsi0 : ata_piix
[ 4.023511] scsi1 : ata_piix
[ 4.026379] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 4.026384] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 4.196646] ata1.00: ATA-5: IC35L040AVER07-0, ER4OA44A, max UDMA/100
[ 4.196653] ata1.00: 80418240 sectors, multi 16: LBA
[ 4.220591] ata1.00: configured for UDMA/100
[ 4.384449] ata2.00: ATAPI: LG CD-ROM CRN-8245B, 1.00a, max UDMA/33
[ 4.400377] ata2.00: configured for UDMA/33
[ 4.400577] scsi 0:0:0:0: Direct-Access ATA IC35L040AVER07-0 ER4O PQ: 0 ANSI: 5
[ 4.402171] scsi 1:0:0:0: CD-ROM LG CD-ROM CRN-8245B 1.00 PQ: 0 ANSI: 5
[ 4.825053] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.825118] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.860807] Driver 'sd' needs updating - please use bus_type methods
[ 4.864272] sd 0:0:0:0: [sda] 80418240 512-byte hardware sectors (41174 MB)
[ 4.864311] sd 0:0:0:0: [sda] Write Protect is off
[ 4.864316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.864375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.864522] sd 0:0:0:0: [sda] 80418240 512-byte hardware sectors (41174 MB)
[ 4.864554] sd 0:0:0:0: [sda] Write Protect is off
[ 4.864559] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.864614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.864622] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.877208] sda1 sda2 < sda5 >
[ 4.896456] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.907277] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 4.907286] Uniform CD-ROM driver Revision: 3.20
[ 4.907458] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.235292] PM: Starting manual resume from disk
[ 5.235300] PM: Resume from partition 8:5
[ 5.235302] PM: Checking hibernation image.
[ 5.235510] PM: Resume from disk failed.
[ 5.295574] kjournald starting. Commit interval 5 seconds
[ 5.295601] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.713996] udevd version 124 started
[ 12.555720] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.617409] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.702063] Linux agpgart interface v0.103
[ 12.764434] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 12.769658] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 12.896867] intel_rng: FWH not detected
[ 13.122441] iTCO_vendor_support: vendor-support=0
[ 13.194578] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.195349] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
[ 13.195567] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.570291] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 13.584085] ACPI: Power Button (FF) [PWRF]
[ 13.584339] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 13.600047] ACPI: Power Button (CM) [PWRB]
[ 14.685543] nvidia: module license 'NVIDIA' taints kernel.
[ 15.216977] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 15.498729] parport_pc 00:0b: reported by Plug and Play ACPI
[ 15.498760] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 15.621328] Linux video capture interface: v2.00
[ 15.719471] ivtv: Start initialization, version 1.4.0
[ 15.719683] ivtv0: Initializing card #0
[ 15.719694] ivtv0: Autodetected I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) card (cx23416 based)
[ 15.727882] ivtv 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.727897] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[ 16.105062] saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[ 16.186173] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 16.656378] tuner 0-0043: chip found @ 0x86 (ivtv i2c driver #0)
[ 16.745151] tda9887 0-0043: creating new instance
[ 16.745157] tda9887 0-0043: tda988[5/6/7] found
[ 16.795675] All bytes are equal. It is not a TEA5767
[ 16.795811] tuner 0-0060: chip found @ 0xc0 (ivtv i2c driver #0)
[ 16.796192] upd64031a 0-0012: chip found @ 0x24 (ivtv i2c driver #0)
[ 16.807406] upd64083 0-005c: chip found @ 0xb8 (ivtv i2c driver #0)
[ 16.822980] wm8739 0-001a: chip found @ 0x34 (ivtv i2c driver #0)
[ 16.828395] vp27smpx 0-005b: chip found @ 0xb6 (ivtv i2c driver #0)
[ 16.891969] tuner-simple 0-0060: creating new instance
[ 16.891977] tuner-simple 0-0060: type set to 46 (Panasonic VP27s/ENGE4324D)
[ 16.894855] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[ 16.894910] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[ 16.894965] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[ 16.895025] ivtv0: Registered device video24 for encoder PCM (320 kB)
[ 16.895031] ivtv0: Initialized card #0: I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner)
[ 16.895179] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.895703] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 16.895734] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 16.895798] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.09 Mon Oct 27 14:23:30 PST 2008
[ 16.897129] ivtv: End initialization
[ 17.564044] intel8x0_measure_ac97_clock: measured 54587 usecs
[ 17.564049] intel8x0: clocking to 48000
[ 20.718835] lp0: using parport0 (interrupt-driven).
[ 20.910131] Adding 1502036k swap on /dev/sda5. Priority:-1 extents:1 across:1502036k
[ 21.511347] EXT3 FS on sda1, internal journal
[ 22.743271] type=1505 audit(1229346585.196:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3734
[ 23.016296] type=1505 audit(1229346585.472:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3739
[ 23.016737] type=1505 audit(1229346585.472:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3739
[ 23.194485] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.898457] ACPI: WMI: Mapper loaded
[ 25.554857] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 25.646299] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 25.646311] apm: overridden by ACPI.
[ 25.815749] ppdev: user-space parallel port driver
[ 28.332023] firmware: requesting v4l-cx2341x-enc.fw
[ 28.422178] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[ 28.620146] ivtv0: Encoder revision: 0x02060039
[ 29.234600] Bluetooth: Core ver 2.13
[ 29.237670] NET: Registered protocol family 31
[ 29.237680] Bluetooth: HCI device and connection manager initialized
[ 29.237686] Bluetooth: HCI socket layer initialized
[ 29.276661] Bluetooth: L2CAP ver 2.11
[ 29.276672] Bluetooth: L2CAP socket layer initialized
[ 29.334640] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.334651] Bluetooth: BNEP filters: protocol multicast
[ 29.401290] Bridge firewalling registered
[ 29.402477] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 29.437178] Bluetooth: SCO (Voice Link) ver 0.6
[ 29.437187] Bluetooth: SCO socket layer initialized
[ 29.452063] Bluetooth: RFCOMM socket layer initialized
[ 29.452574] Bluetooth: RFCOMM TTY layer initialized
[ 29.452586] Bluetooth: RFCOMM ver 1.10
[ 32.927035] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 32.927070] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 32.927114] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[ 33.604392] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 33.890893] NET: Registered protocol family 17
[ 253.384341] ppdev0: registered pardevice
[ 253.440548] ppdev0: unregistered pardevice
[ 254.540662] ppdev0: registered pardevice
[ 254.588063] ppdev0: unregistered pardevice
[ 255.379459] ppdev0: registered pardevice
[ 255.428253] ppdev0: unregistered pardevice
[ 672.036031] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 672.199024] usb 1-2: configuration #1 chosen from 1 choice
[ 672.349288] usbcore: registered new interface driver libusual
[ 672.376170] Initializing USB Mass Storage driver...
[ 672.379632] scsi2 : SCSI emulation for USB Mass Storage devices
[ 672.381643] usbcore: registered new interface driver usb-storage
[ 672.381655] USB Mass Storage support registered.
[ 672.384538] usb-storage: device found at 2
[ 672.384547] usb-storage: waiting for device to settle before scanning
[ 677.384178] usb-storage: device scan complete
[ 677.385610] scsi 2:0:0:0: Direct-Access USBDisk FlashDisk 1.00 PQ: 0 ANSI: 2
[ 677.389883] sd 2:0:0:0: [sdb] 2002000 512-byte hardware sectors (1025 MB)
[ 677.394552] sd 2:0:0:0: [sdb] Write Protect is off
[ 677.394564] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 677.394569] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 677.396887] sd 2:0:0:0: [sdb] 2002000 512-byte hardware sectors (1025 MB)
[ 677.397758] sd 2:0:0:0: [sdb] Write Protect is off
[ 677.397768] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 677.397772] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 677.398485] sdb: sdb1
[ 677.497564] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 677.498110] sd 2:0:0:0: Attached scsi generic sg2 type 0